Unlock the full potential of your cutting projects with our Coarse Cut Notched diamond saw blades, meticulously crafted for durability and efficiency. The innovative design ensures smooth and precise cuts, allowing you to tackle even the toughest materials with ease.
Coarse Cut Notched diamond saw blades are designed for professional use and are made with high-quality materials. The Diamond Coarse Cut Notched Saw Blades are manufactured by crimping synthetic diamonds directly into the edge of the saw blade, making them ideal for cutting materials such as turquoise, opal, glass, and stones in the 4-7 range on the Mohs hardness scale. These blades are faster than regular notched rim blades and come in smaller sizes with thin cores to minimize material loss when cutting valuable materials.The Thick Notched Diamond Saw Blades are made with high-quality diamonds grit (120#) that is pressed onto a solid steel core, making them ideal for industrial lapidary cutting and slabbing of agates, jades, and geodes. These blades have thick kerfs and stiff cores, and all of them have a 25mm hole that can be used with 3/4", 5/8" arbors, and 1/2" bushings. It is important to use a lubricant such as water or oil when using these blades and to never run them dry. Using a good quality cutting oil can enhance the performance and lifespan of the blades. Following the recommended operating speeds and spin-drying the blades after use can prevent rusting.
How to Buy
Request an Equipment Quote
Ready to buy stuff from Flexible,Request a quote now.
Become a Delare
Becoming a Flexbile Authorized Dealer
Shop
Browse Parts and equpments on our store
Solution
Flexbile solutions to help you tackle any challenge
Reviews
FAQ
Q:When should a coarse blade be used?
For example: a coarse tooth blade (e.g., 2 or 3 TPI) should be used for thicker stock. 18 to 32 TPI should be used on thinner metals or plastic (0.5 cm or 1/4 inch). General wood cutting typically requires about 4 TPI.
Q: Will more teeth per inch on a saw blade give you a coarse faster cut?
In general, blades with more teeth yield a smoother cut, and blades with fewer teeth remove material faster. A 10" blade designed for ripping lumber, for example, usually has as few as 24 teeth and is designed to quickly remove material along the length of the grain.
Q: What is the difference between fine and coarse saw blades?
Blades for circular saws come in the same options as are available for table saws—fine-tooth blades for precision cross-cutting, a coarser blade for rip-cutting, and a combination blade for all-purpose framing carpentry.
Q: What are coarse toothed blades best suited for cutting?
Thin materials like sheet metal work best with a fine-toothed blade. Whereas thick, dense materials like structural steel go better with a coarse-toothed blade.
Q: How is the coarseness of a saw blade determined?
This is usually quoted in teeth per inch (T.P.I.). The larger the tooth, the faster the cut, because the tooth has a large gullet and has a greater capacity to transport large amounts of sawdust through the job. Generally, the larger the tooth, the coarser the cut, and the poorer the surface finish of the cut.
Q: What is a coarse cut saw?
Coarse-toothed saws are great for cutting through thicker or tougher materials quickly. The wider gaps between teeth mean that they can tear out more wood with each thrust of the blade, but the end result won't be particularly neat.
